Read your meter. Know your day.
Note your meter at about 7–8am and 5–6pm for a few days. See how much you use by day and by night.
How to do it
- Find your electric meter and read the kWh number (all the digits, left to right).
- Write it down at about 7–8am and again at about 5–6pm.
- Do this for 3 days or more, at the same times. Days that are normal for you work best.
Enter the morning and evening readings for at least one day.
Why it matters for solar size
- Solar panels make power only while the sun is up. What you use at that time comes straight from your panels.
- What you use at night comes from the grid or from a battery.
- With net metering, power you send to the grid earns a credit at Meralco's monthly blended generation cost, not the full retail rate.
- So your daytime use is a good starting size for a system without a battery. If most of your use is at night, look at net metering or a battery.

The numbers behind this
- Daytime = from the morning reading to the evening reading on the same day.
- Night-time = from the evening reading to the next morning's reading.
- Averages use only the days and nights with both readings.
- 1 kW of panels makes about 3.5–4 kWh a day in Cavite and Laguna. The high end is measured EU PVGIS data (2005–2023 weather, best tilt, 14% system losses).
- The low end takes 12.5% off for roofs that face the wrong way or get some shade. That is our assumption, not measured.
- Solar size = kWh a day ÷ kWh a day from 1 kW of panels.
- This shows energy and system size only. It is an estimate, not a quote, and not a savings figure.
Sources
Read next
- Which system type fits you? ›
- Net metering in the Philippines: how it works ›
- How to read your Meralco bill ›
See what your roof can do.
Asking is free. Our service fee is included in the quote. No obligation to accept.
Get my solar quote