How to read a solar panel datasheet

Every panel model has a datasheet. You only need a few lines on it to compare panels fairly.

Updated November 2026

Power and efficiency

The rated power (in watts) tells you how many panels you need for a given system size. Efficiency tells you how much power you get per square metre of roof. EnergySage says mono panels typically run 15 to 20% or higher, and poly panels below 20%.

Cell type

Look for mono or poly, and for PERC, TOPCon or HJT. As typical retailer figures, A1 SolarStore gives 20–22% efficiency for PERC, 22–25.5% for TOPCon and 24–26% for HJT. Treat these as rough ranges.

Temperature coefficient of power

This is shown as a negative number in %/°C. It tells you how much power the panel loses for each degree hotter. Closer to zero is better on a hot roof. Typical retailer figures: about −0.35%/°C for PERC, −0.31%/°C for TOPCon and −0.26%/°C for HJT (A1 SolarStore).

Bifaciality

Only for bifacial panels. It shows how well the back side works compared with the front. A1 SolarStore gives 65–75% for PERC, 80–90% for TOPCon and up to 95% for HJT. The extra energy depends on how the panels are mounted.

Warranty and degradation

  • Product warranty in years: usually at least 10–12 (EnergySage).
  • Power warranty: often at least 90% at year 10 and 80% at year 25 (EnergySage).
  • First-year loss and yearly loss after that. NREL's review found a median of 0.5% a year.

Sources

See what your roof can do.

Free to ask. No obligation to accept.

Get my solar quote

More guides